- Compounds and Polishes
- >
- Angelwax Regenerate Medium Cut Compound 5L
Angelwax Regenerate Medium Cut Compound 5L
Angelwax REGENERATE MEDIUM CUT COMPOUND & SWIRL REMOVER is a water-based surface polishing compound that has been formulated to remove and correct medium to heavy scratches, swirl marks, paint defects, imperfections and sanding marks up to 2500 grade. Due to its unique formula, courtesy to the mad scientists of Angelwax, there is little to no dusting and won’t stain trim.
Angelwax REGENERATE is silicone-free and suitable for all types of paint.
Available in 500ml, 1L and 5L bottles.
Directions: Shake the bottle well before use. Always check the compatibility and suitability of the paint surface by testing in an inconspicuous area.
Apply the desired amount of polish to the selected machine compounding pad from the Angelwax range.
Using a rotary or dual action polishing machine spread the compound around the panel with the machine polisher switched off. Switch on the machine polisher and apply medium pressure whilst working in a crosswise motion until a clear film appears on the paint surface.
Remove any remaining traces of polish with a soft, clean microfiber cloth. For the final correction and for a high gloss finish use Angelwax REDEMPTION ULTRA FINE POLISHING COMPOUND and once again, remove the clear film on the paint surface with a soft, clean microfiber cloth.
Top Tip: Prior to machine polishing, use Angelwax STRIPPED-EASE panel wipe to suitably clean and prepare the paint surface. Once the final polish stage has been completed, protect the paint surface using Angelwax Ti-22 TITANIUM SPRAY SEALANT and apply a wax from the Angelwax range of detailing waxes.